Section Library

Section Library

AWS District 16, Chapter 35 (Kansas)
Technical Library Inventory: February 26, 2020

Library Location:
WSU Tech (formerly WATC/Wichita Area Technical College)
Director, Library & Information Services: Britten Kuckelman
[email protected]   [email protected]
National Center for Aviation Training (NCAT)
4004 N. Webb Road, Room G116
Wichita, KS 67226
Ph #: 316-677-1417

Color reference for easy search re: code

AWS A2, A3, A10 code series
BROWN
AWS A4, A5 code series
GRAY
AWS B code series
GREEN
AWS C code series
BLUE
AWS D code series
RED
AWS F code series
YELLOW
AWS G code series
ORANGE
AWS J code series
PURPLE
AWS Q code series
GREEN

Unless otherwise noted, all publications are “An American National Standard”
Note: All items are available for reference and IN LIBRARY USE ONLY (cannot be checked out)

NameReference #
Bridge Welding CodeAASHTO/AWS D1.5M/D1.5:2008
Bridge Welding CodeAASHTO/AWS D1.5M/D1.5:2008
Bridge Welding CodeAASHTO/AWS D1.5M/D1.5:2010
Bridge Welding CodeAASHTO/AWS D1.5M/D1.5:2015
Ventilation Guide for Weld FumeANSI/AWS F3.2M/F3.2:2001
Metric Practice Guide for the Welding IndustryAWS A1.1:2016
Specification for Calibration and Performance Testing of Secondary Current Sensing Coils and Weld Current Monitors used in Single-Phase AC Resistance WeldingAWS A10.1M.2007
Specification for Calibration and Performance Testing of Secondary Current Sensing Coils and Weld Current Monitors used in Single-Phase AC Resistance WeldingAWS A10.1M.2007
Standard Symbols for Welding, Brazing, and Nondestructive ExaminationAWS A2.4:2007
Standard Symbols for Welding, Brazing, and Nondestructive ExaminationAWS A2.4:2012
Standard Welding Terms and Definitions Including Terms for Adhesive Bonding, Brazing, Soldering, Thermal Cutting, and Thermal SprayingAWS A3.0M/A3.0:2010
Standard Procedures for Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic and Duplex Ferritic-Austenitic Stainless Steel Weld Metal (ISO 8249:2000MOD)AWS A4.2M:2006
Standard Methods for Classification Testing of Positional Capacity and Root Penetration of Welding Consumables in a Fillet Weld  (ISO 15792-3:2011 MOD)AWS A4.5M/A4.5:2012
Welding and Brazing Consumables–Procurement of Filler Metals and FluxesAWS A5.01M/A5.01:2019 (ISO 14344:2010 MOD
Welding Consumables-Procurement of Filler Metals and FluxesAWS A5.01M/A5.01:2013 (ISO 14344:2010 MOD)
Specification for Filler Metal Standard Sizes, Packaging, and Physical AttributesAWS A5.02/A5.02M:2007
Specification for Carbon Steel Electrodes for Shielded Metal Arc WeldingAWS A5.1/A5.1M:2004
Specification for Carbon Steel Electrodes for Shielded Metal Arc WeldingAWS A5.1/A5.1M:2004
Specification for Carbon Steel Electrodes for Shielded Metal Arc WeldingAWS A5.1/A5.1M:2012
Welding Consumables–Wire Electrodes, Wires and Rods for Welding of Aluminum and Aluminum-Alloys–ClassificationAWS A5.10/A5.10M:2017 (ISO 18273:2004 MOD)
Welding Consumables–Wire Electrodes, Wires and Rods for Welding of Aluminum and Aluminum-Alloys–ClassificationAWS A5.10/A5.10M:2012 (ISO 18273:2004 MOD)
Specification for Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal Arc WeldingAWS A5.11/A5.11M:2010
Specification for Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal Arc WeldingAWS A5.11/A5.11M:2018
Specification for Tungsten and Oxide Dispersed Tungsten Electrodes for Arc Welding and Cutting (ISO 6848:2004 MOD)AWS A5.12M/A5.12:2009
Specification for Surfacing Electrodes for Shielded Metal Arc WeldingAWS A5.13/A5.13M:2010
Specification for Surfacing Electrodes for Shielded Metal Arc WeldingAWS A5.13:2000
Specification for Nickel and Nickel-Alloy Bare Welding Electrodes and RodsAWS A5.14/A5.14M:2018
Specification for Nickel and Nickel-Alloy Bare Welding Electrodes and RodsAWS A5.14/A5.14M:2009
Specification for Nickel and Nickel-Alloy Bare Welding Electrodes and RodsAWS A5.14/A5.14M:2009
Specification for Nickel and Nickel-Alloy Bare Welding Electrodes and RodsAWS A5.14/A5.14M:2018
Specification for Titanium and Titanium-Alloy Welding Electrodes and RodsAWS A5.16/A5.16M:2004
Specification for Titanium and Titanium-Alloy Welding Electrodes and RodsAWS A5.16/A5.16M:2007
Specification for Titanium and Titanium-Alloy Welding Electrodes and RodsAWS A5.16/A5.16M:2007
Specification for Titanium and Titanium-Alloy Welding Electrodes and RodsAWS A5.16/A5.16M:2013 (ISO 24034:2010 MOD)
Specification for Titanium and Titanium-Alloy Welding Electrodes and RodsAWS A5.16/A5.16M:2013 (ISO 24034:2010 MOD)
Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc WeldingAWS A5.18/A5.18M:2001
Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc WeldingAWS A5.18/A5.18M:2017
Specification for Carbon and Low-Alloy Steel Rods for Oxyfuel Gas WeldingAWS A5.2/A5.2M:2007
Specification for Carbon and Low-Alloy Steel Rods for Oxyfuel Gas WeldingAWS A5.2/A5.2M:2007
Specification for Carbon and Low-Alloy Steel Rods for Oxyfuel Gas WeldingAWS A5.2/A5.2M:2018
Specification for Bare Electrodes and Rods for SurfacingAWS A5.21/A5.21M:2011
Specification for Bare Electrodes and Rods for SurfacingAWS A5.21:2001
Specification for Stainless Steel Flux Cored and Metal Cored Welding Electrodes and RodsAWS A5.22/A5.22M:2010
Specification for Stainless Steel Flux Cored and Metal Cored Welding Electrodes and RodsAWS A5.22/A5.22M:2012
Specification for Low-Alloy Steel Electrodes and Fluxes for Submerged Arc WeldingAWS A5.23/A5.23M:2007
Specification for Low-Alloy Steel Electrodes and Fluxes for Submerged Arc WeldingAWS A5.23/A5.23M:2007
Specification for Zirconium and Zirconium-Alloy Welding Electrodes and RodsAWS A5.24/A5.24M:2005
Specification for Zirconium and Zirconium-Alloy Welding Electrodes and RodsAWS A5.24/A5.24M:2014
Specification for Low-Alloy Steel Electrodes for Flux Cored Arc WeldingAWS A5.29/A5.29M:2010
Specification for Consumable InsertsAWS A5.30/A5.30M:2007
Specification for Consumable InsertsAWS A5.30/A5.30M:2007
Specification for Fluxes for Brazing and Braze WeldingAWS A5.31M/A5.31:2012
Welding Consumables-Gases and Gas Mixtures for Fusion Welding and Allied Processes (ISO 14175:2008 MOD)AWS A5.32M/A5.32:2011
Specification for Nickel-Alloy Electrodes for Flux Cored Arc WeldingAWS A5.34/A5.34M:2007
Specification for Nickel-Alloy Electrodes for Flux Cored Arc WeldingAWS A5.34/A5.34M:2007
Specification for Nickel-Alloy Electrodes for Flux Cored Arc WeldingAWS A5.34/A5.34M:2013
Specification for Nickel-Alloy Flux Cored and Metal Cored Welding ElectrodesAWS A5.34/A5.34M:2018
Specification for Covered Electrodes for Underwater Wet Shielded Metal Arc WeldingAWS A5.35:2015
Specification for Carbon and Low-Alloy Steel Flux Cored Electrodes for Flux Cored Arc Welding and Metal Cored Electrodes for Gas Metal Arc WeldingAWS A5.36/A5.36M:2012
Specification for Carbon and Low-Alloy Steel Flux Cored Electrodes for Flux Cored Arc Welding and Metal Cored Electrodes for Gas Metal Arc WeldingAWS A5.36/A5.36M:2016
Specification for Stainless Steel Electrodes for Shielded Metal Arc WeldingAWS A5.4/A5.4M:2006
Specification for Stainless Steel Electrodes for Shielded Metal Arc WeldingAWS A5.4/A5.4M:2006
Specification for Stainless Steel Electrodes for Shielded Metal Arc WeldingAWS A5.4/A5.4M:2012
Specification for Low-Alloy Steel Electrodes for Shielded Metal Arc WeldingAWS A5.5/A5.5:2006
Specification for Low-Alloy Steel Electrodes for Shielded Metal Arc WeldingAWS A5.5/A5.5M:2006
Specification for Low-Alloy Steel Electrodes for Shielded Metal Arc WeldingAWS A5.5/A5.5M:2014
Specification for Copper and Copper-Alloy Electrodes for Shielded Metal Arc WeldingAWS A5.6/A5.6M:2008
Specification for Copper and Copper-Alloy Electrodes for Shielded Metal Arc WeldingAWS A5.6/A5.6M:2008
Specification for Copper and Copper-Alloy Bare Welding Rods and ElectrodesAWS A5.7/A5.7M:2007
Specification for Copper and Copper-Alloy Bare Welding Rods and ElectrodesAWS A5.7/A5.7M:2007
Specification for Filler Metals for Brazing and Braze WeldingAWS A5.8M/A5.8:2019
Specification for Filler Metals for Brazing and Braze WeldingAWS A5.8/A5.8M:2004
Welding Consumables–Wire Electrodes, Strip Electrodes, Wires, and Rods for Arc Welding of Stainless and Heat Resisting Steels–ClassificationAWS A5.9/A5.9M:2017 (ISO 14343:2009 MOD)
Specification for Bare Stainless Steel Welding Electrodes and RodsAWS A5.9/A5.9M:2006
Specification for Bare Stainless Steel Welding Electrodes and RodsAWS A5.9/A5.9M:2012
Guide for Verification and Validation in Computation Weld MechanicsAWS A9.5:2013
Guide for the Nondestructive Examination of WeldsAWS B1.10M/B1.10:2009
Guide for the Nondestructive Examination of WeldsAWS B1.10M/B1.10:2016
Guide for the Visual Examination of WeldsAWS B1.11M/B.1.11:2015
Specification for Welding Procedure and Performance QualificationAWS B2.1/B2.1M:2009
Specification for Welding Procedure and Performance QualificationAWS B2.1/B2.1M:2014
Base Metal Grouping for Welding Procedure and Performance QualificationAWS B2.1-BMG:2005
Specification for Brazing Procedure and Performance QualificationAWS B2.2/B2.2M:2010
Specification for Brazing Procedure and PerformanceAWS B2.2/B2.2M:2016
Specification for Soldering Procedure and Performance QualificationAWS B2.3/B2.3M:2008
Specification for Soldering Procedure and Performance QualificationAWS B2.3/B2.3M:2012
Specification for Soldering Procedure and Performance QualificationAWS B2.3/B2.3M:2018
Specifications for Welding Procedure and Performance Qualification for ThermoplasticsAWS B2.4:2006
Specification for Welding Procedure and Performance Qualification for ThermoplasticsAWS B2.4:2006
Specification for Welding Procedure and Performance Qualification for ThermoplasticsAWS B2.4:2012
Standard Methods for Mechanical Testing of WeldsAWS B4.0:2007
Standard Methods for Mechanical Testing of WeldsAWS B4.0:2016
Specification for the Qualification of Welding InspectorsAWS B5.1:2013
Specification for the Training, Qualification, and Company Certification of Welding Inspector Specialists and Welding Inspector AssistantsAWS B5.2:2018
Specification for the Qualification of Welding Sales RepresentativesAWS B5.14:2009
Specification for the Qualification of Radiographic InterpretersAWS B5.15:2010
Specification for the Qualification of Welding EngineersAWS B5.16:2006
Specification for the Qualification of Welding FabricatorsAWS B5.17:2014
Specification for the Qualification of Welding FabricatorsAWS B5.17:2008
Specification for the Qualification of Welding SupervisorsAWS B5.9:2006
Recommended Practices for Resistance WeldingAWS C1.1M/C1.1:2012
Specification for Resistance Welding of Carbon and Low-Alloy SteelsAWS C1.4M/C1.4:2017
Specification for Resistance Welding of Carbon and Low-Alloy SteelsAWS C1.4M/C1.4:2009
Specification for Resistance Welding of Carbon and Low-Alloy SteelsAWS C1.4M/C1.4:2009
Specification for the Qualification of Resistance Welding TechniciansAWS C1.5:2009
Specification for the Qualification of Resistance Welding TechniciansAWS C1.5:2009
Specification for the Qualification of Resistance Welding TechniciansAWS C1.5:2015
Guide for Thermal-Spray Operator Qualification ProgramsAWS C2.16/C2.16M:2017
Guide for Thermal-Spray Operator QualificationAWS C2.16/C2.16M:2002
Specification for the  Application of Thermal Spray Coatings to Machine Elements for OEM and RepairAWS C2.19/C2.19M:2013
Specification for Thermal Spraying Zinc Anodes on Steel Reinforced ConcreteAWS C2.20/C2.20M:2002
Specification for Thermal Spraying Zinc Anodes on Steel Reinforced ConcreteAWS C2.20/c2.20M:2016
Specification for Thermal Spray Equipment Acceptance InspectionAWS C2.21M/C2.21:2003
Specification for Thermal Spray Equipment Performance VerificationAWS C2.21M/C2.21:2015
Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of SteelAWS C2.23M/C2.23:2003, NACE No. 12, SSPC-CS 23.00
Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of SteelAWS C2.23M/C2.23:2018, NACE No. 12, SSPC CS-23
Specification for Thermal Spray Feedstock–Wire and RodsAWS C2.25/C2.25M:2012 (R2018)
Specification for Thermal Spray Feedstock–Wire and RodsAWS C2.25/2.25M:2012
Specification for Thermal Spray Feedstock-Solid and Composite Wire and Ceramic RodsAWS C2.25/C2.25M:2002
Specification for Torch SolderingAWS C3.11M/C3.11:2011
Specification for Furnace SolderingAWS C3.12M/C3.12:2017
Standard Method for Evaluating the Strength of Brazed JointsAWS C3.2M/C3.2:2001
Standard Method for Evaluating the Strength of Brazed JointsAWS C3.2M/C3.2:2008
Standard Method for Evaluating the Strength of Brazed JointsAWS C3.2M/C3.2:2019
Recommended Practices for the Design, Manufacture, and Examination of Critical Brazed ComponentsAWS C3.3:2002
Recommended Practices for the Design, Manufacture, and Examination of Critical Brazed ComponentsAWS C3.3:2008
Specification for Torch BrazingAWS C3.4M/C3.4:2007
Specification for Torch BrazingAWS C3.4M/C3.4:2007
Specification for Torch BrazingAWS C3.4M/C3.4:2016
Specification for Induction BrazingAWS C3.5M/C3.5:2007
Specification for Induction BrazingAWS C3.5M/C3.5:2007
Specification for Induction BrazingAWS C3.5M/C3.5:2016
Specification for Furnace BrazingAWS C3.6M/C3.6:2008
Specification for Furnace BrazingAWS C3.6M/C3.6:2008
Specification for Furnace BrazingAWS C3.6M/C3.6:2016
Specification for the Ultrasonic Pulse-Echo Examination of Brazed JointsAWS C3.8M/C3.8:2011
Specification for Resistance BrazingAWS C3.9M/C3.9:2009
Recommended Practices for Safe Oxyfuel Gas Cutting Torch OperationAWS C4.2/C4.2M:2006
Recommended Practices for Safe Oxyfuel Gas Cutting Torch OperationAWS C4.2/C4.2M:2009
Recommended Practices for Safe Oxyfuel Gas Cutting Torch OperationAWS C4.2/C4.2M:2009
Recommended Practices for Oxyfuel Gas Cutting Torch OperationAWS C4.2/C4.2M:2017
Operator’s Manual for Oxyfuel Gas CuttingAWS C4.2:2002
Recommended Practices for Safe Oxyfuel Gas Heating Torch OperatingAWS C4.3/C4.3M:2007
Recommended Practices for Safe Oxyfuel Gas Heating Torch OperationAWS C4.3/C4.3M:2007
Recommended Practices for Oxyfuel Gas Heating Torch OperationAWS C4.3/C4.3M:2018
Recommended Practices for Heat Shaping and Straightening with Oxyfuel Gas Heating TorchesAWS C4.4/C4.4:2007
Recommended Practices for Heat Shaping and Straightening with Oxyfuel Gas Heating TorchesAWS C4.4/C4.4M:2004
Recommended Practices for Heat Shaping and Straightening with Oxyfuel Gas Heating TorchesAWS C4.4/C4.4M:2007
Uniform Designation for System for Oxyfuel NozzlesAWS C4.5M:2006
Uniform Designation System for Oxyfuel NozzlesAWS C4.5M:2012
Thermal Cutting-Classification of Thermal Cuts-Geometric Product Specification and Quality Tolerances (ISO 9013:2002IDT)AWS C4.6M:2006
Recommended Practices for Air Carbon Arc Gouging and CuttingAWS C5.3:2000
Specification for Friction Welding of MetalsAWS C6.2/C6.2M:2006
Recommended Practices for Electron Beam WeldingAWS C7.1M/C7.1:2004
Recommended Practices for Electron Beam Welding and Allied ProcessesAWS C7.1M/C7.1:2013
Recommended Practices for Electron Beam Welding and Allied ProcessesAWS C7.1M/C7.1:2013
Recommended Practices for Laser Beam Welding, Cutting, and Allied ProcessesAWS C7.2M:2010
Process Specification for Electron Beam WeldingAWS C7.3:2016
Process Specification and Operator Qualification for Laser Beam WeldingAWS C7.4/C7.4M:2017
Process Specification and Operator Qualification for Laser Beam WeldingAWS C7.4/C7.4M:2008
Process Specification and Operator Qualification for Laser Hybrid WeldingAWS C7.6/C7.6M:2017
Structural Welding Code-SteelAWS D1.1:2015
Structural Welding Code-SteelAWS D1.1/D1.1M:2008
Structural Welding Code-SteelAWS D1.1/D1.1M:2010
Structural Welding Code-AluminumAWS D1.2/D1.2M:2008
Structural Welding Code-AluminumAWS D1.2/D1.2M:2014
Structural Welding Code-Sheet SteelAWS D1.3/D1.3M:2008
Structural Welding Code-Sheet SteelAWS D1.3/D1.3M:2008
Structural Welding Code-Sheet SteelAWS D1.3/D1.3M:2018
Structural Welding Code–Reinforcing SteelAWS D1.4/D1.4M:2011
Structural Welding Code-Steel Reinforcing BarsAWS D1.4/D1.4M:2018
Structural Welding Code-Stainless SteelAWS D1.6/D1.6M:2017
Structural Welding Code-Stainless SteelAWS D1.6/D1.6M:2007
Structural Welding Code-Stainless SteelAWS D1.6/D1.6M:2007
Guide for Strengthening and Repairing Existing StructuresAWS D1.7/D1.7M:2010
Structural Welding Code-Seismic SupplementAWS D1.8/D1.8M:2005
Structural Welding Code-Seismic SupplementAWS D1.8/D1.8M:2009
Structural Welding Code-SeismicAWS D1.8/D1.8M:2016
Structural Welding Code-TitaniumAWS D1.9/D1.9M:2007
Structural Welding Code-TitaniumAWS D1.9/D1.9M:2007
Structural Welding Code-TitaniumAWS D1.9/D1.9M:2015
Guide for Root Pass Welding of Pipe Without BackingAWS D10.11M/D10.11:2007
Recommended Practices for the Brazing of Copper Tubing and Fittings for Medical Gas SystemsAWS D10.13/D10.13M:2001
Guide for Multipass Orbital Machine Pipe Groove WeldingAWS D10.14M/D10.14:2010
Guide for Welding Ferritic/Austenitic Duplex Stainless Steel Piping and TubingAWS D10.18M/D10.18:2008
Guide for Welding Ferritic/Austenitic Duplex Stainless Steel Piping and TubingAWS D10.18M/D10.18:2018
Guide for the Gas Shielded Arc Welding of Aluminum and Aluminum Alloy PipeAWS D10.7M/D10.7:2000
Guide for the Gas Shielded Arc Welding of Aluminum and Aluminum Alloy PipeAWS D10.7M/D10.7:2008
Specification for Welding Earthmoving, Construction, Agricultural, and Ground-Based Material Handling EquipmentAWS D14.3/D14-3M:2019
Specification for Welding Earthmoving, Construction, and Agricultural EquipmentAWS D14.3/D14.3M:2010
Specification for Welded Joints in Machinery and EquipmentAWS D14.4/D14.4M:2005
Specification for the Design of Welded Joints in Machinery and EquipmentAWS D14.4/D14.4M:2019
Specification for the Design of Welded Joints in Machinery and EquipmentAWS D14.4/D14.4M:2012
Specification for Welding of Presses and Press ComponentsAWS D14.5/D14.5M:2009
Specification for Welding of Rotating Elements of EquipmentAWS D14.6/D14.6M:2005
Specification for Welding of Rotating Elements of EquipmentAWS D14.6/D14.6M:2012
Standard Methods for the Avoidance of Cold Cracks (ISO/TR 17844:2004 IDT)AWS D14.8M:2009
Specification for the Welding of Hydraulic CylindersAWS D14.9/D14.9M:2013
Railroad Welding Specification for Cars and LocomotivesAWS D15.1/D15.1M:2019
Railroad Welding Specification for Cars and LocomotivesAWS D15.1/D15.1M:2005
Railroad Welding Specification for Cars and LocomotivesAWS D15.1/D15.1M:2007
Railroad Welding Specification for Cars and LocomotivesAWS D15.1/D15.1M:2012
Recommended Practices for the Welding of Rails and Related Rail Components for Use by Rail VehiclesAWS D15.2/D15.2M:2013
Specification for Robotic Arc Welding SafetyAWS D16.1M/D16.1:2004
Specification for Robotic Arc Welding SafetyAWS D16.1M/D16.1:2018
Guide for Components of Robotic and Automatic Arc Welding InstallationsAWS D16.2M/D16.2:2007
Guide for Components of Robotic and Automatic Arc Welding InstallationsAWS D16.2M/D16.2:2007
Risk Assessment Guide for Robotic Arc WeldingAWS D16.3M/D16.3:2017
Risk Assessment Guide for Robotic Arc WeldingAWS D16.3M/D16.3:2009
Risk Assessment Guide for Robotic Arc WeldingAWS D16.3M/D16.3:2009
Specification for the Qualification of Robotic Arc Welding PersonnelAWS D16.4M/D16.4:2015
Specification for Robot Arc Welding Training and Testing CellAWS D16.6M/D16.6:2018
Specification for Fusion Welding for Aerospace ApplicationsAWS D17.1/D17.1M:2017
Specification for Fusion Welding for Aerospace ApplicationsAWS D17.1/D17.1M:2-17-AMD2
Specification for Resistance Welding for Aerospace ApplicationsAWS D17.2/D17.2M:2007
Specification for Resistance Welding for Aerospace ApplicationsAWS D17.2/D17.2M:2007
Specification for Resistance Welding for Aerospace ApplicationsAWS D17.2/D17.2M:2013
Specification for Resistance Welding for Aerospace ApplicationsAWS D17.2/D17.2M:2019
Specification for Friction Stir Welding of Aluminum Alloys for Aerospace ApplicationsAWS D17.3/D17.3M:2010
Specification for Friction Stir Welding of Aluminum Alloys for Aerospace ApplicationsAWS D17.3/D17.3M:2016
Specification for Welding of Austenitic Stainless Steel Tube and Pipe Systems in Sanitary (Hygienic) ApplicationsAWS D18.1/D18.1M:2009
Specification for Welding of Tanks, Vessels, and Other Equipment in Sanitary (Hygienic) ApplicationsAWS D18.3/D18.3M:2015
Specification for Fabrication of Metal Components using Additive ManufacturingAWS D20.1/D20.1M:2019
Underwater Welding CodeAWS D3.6M:2017
Underwater Welding CodeAWS D3.6M:2010
Guide for Aluminum Hull WeldingAWS D3.7:2004
Specification for the Classification of Weld-Through Paint PrimersAWS D3.9/D3.9M:2019
Specification for Classification of Weld-Through Paint PrimersAWS D3.9:2010
Specification for Automotive Weld Quality-Arc Welding of AluminumAWS D8.14M:2008
Specification for Automotive Weld Quality-Arc Welding of AluminumAWS D8.14M:2017
Specification for Automotive Weld Quality – Resistance Spot Welding of SteelAWS D8.1M:2007
Specification for Automotive Weld Quality-Resistance Spot Welding of SteelAWS D8.1M:2007
Specification for Automotive Weld Quality-Resistance Spot Welding of SteelAWS D8.1M:2013
Specification for Automotive Weld quality-Resistance Spot Welding of AluminumAWS D8.2M:2017
Specification for Automotive Resistance Spot Welding ElectrodesAWS D8.6:2005
Recommended Practices for Automotive Weld Quality-Resistance Spot WeldingAWS D8.7M:2005
Specification for Automotive Weld Quality-Arc Welding of SteelAWS D8.8M:2014
Specification for Automotive Weld Quality-Arc Welding of SteelAWS D8.8M:2007
Test Methods for Evaluating the Resistance Spot Welding Behavior of Automotive Sheet Steel MaterialsAWS D8.9M:2012
Sheet Metal Welding CodeAWS D9.1/D9.1M:2018
Sheet Metal Welding CodeAWS D9.1M/D9.1:2006
Sheet Metal Welding CodeAWS D9.1M/D9.1:2012
Sheet Metal Welding CodeAWS D9.1M/D9.2006
Method for Sampling Airborne Particulates Generated by Welding and Allied ProcessesAWS F1.1M:2006
Methods for Sampling Fumes and Gases Generated by Welding and Allied ProcessesAWS F1.1M:2018
Method for Sampling Airborne Particulates Generated by Welding and Allied ProcessesAWS F1.1M:2006
Laboratory Method for Measuring Fume Generation Rates and Total Fume Emission of Welding and Allied ProcessesAWS F1.2:2006
Laboratory Method for Measuring Fume Generation Rates and Total Fume Emission of Welding and Allied ProcessesAWS F1.2:2013
A Sampling Strategy Guide for Evaluating Contaminants in the Welding EnvironmentAWS F1.3M:2006
A Sampling Strategy Guide for Evaluating Contaminants in the Welding EnvironmentAWS F1.3M:2006
Methods for Sampling and Analyzing Gases from Welding and Allied ProcessesAWS F1.5M:2003
Guide for Estimating Welding Emissions for EPA and Ventilation Permit ReportingAWS F1.6:2017
Guide for Estimating Welding Emissions for EPA and Ventilation Permit ReportingAWS F1.6:2003
Specification for Use and Performance of Transparent Welding Curtains and ScreensAWS F2.3M:2019
Specification for Use and Performance of Transparent Welding Curtains and ScreensAWS F2.3M:2001
Specification for Use and Performance of Transparent Welding Curtains and ScreensAWS F2.3M:2011
Ventilation Guide for Weld FumeAWS F3.2:2018
Safe Practices for the Preparation of Containers and Piping for Welding, Cutting, and Allied ProcessesAWS F4.1:2017
Safe Practices for the Preparation of Containers and Piping for Welding and CuttingAWS F4.1:2007
Safe Practices for the Preparation of Containers and Piping for Welding and CuttingAWS F4.1:2007
Guide for the Evaluation of Hot Gas, Hot Gas Extrusion, and Heated Tool Butt Thermoplastic WeldsAWS G1.10M:2001
Guide for the Evaluation of Thermoplastic WeldsAWS G1.10M:2016
Guide to Ultrasonic Assembly of ThermoplasticsAWS G1.1M/G1.1:2006
Specification for the Qualification of Plastics Welding Inspectors for Hot Gas, Hot Gas Extrusion, and Heated Tool Butt Thermoplastic WeldsAWS G1.6:2006
Guide for the Joining of Wrought Nickel-Based AlloysAWS G2.1M/G2.1:2002
Guide for the Joining of Wrought Nickel-Based AlloysAWS G2.1M/G2.1:2012
Guide for the Joining of Wrought Solid Solution Austenitic Stainless SteelsAWS G2.3M/G2.3:2009
Guide for the Joining of Solid Solution Austenitic Stainless SteelsAWS G2.3M/G2.3:2012
Guide for the Joining of Solid Solution Austenitic Stainless SteelsAWS G2.3M/G2.3:2019
Guide for the Fusion Welding of Titanium and Titanium  AlloysAWS G2.4/G2.4M:2007
Guide for the Fusion Welding of Titanium and Titanium  AlloysAWS G2.4/G2.4M:2014
Guide for the Fusion Welding of Zirconium and Zirconium AlloysAWS G2.5/G2.5M:2012
Specification for Resistance Welding ControlsAWS J1.1M/J1.1:2013
Guide to Installation and Maintenance of Resistance Welding MachinesAWS J1.2M/J1.2:2016
Standard for AWS Certification of Welding InspectorsAWS QC1:96
Guide for Components of Robotic and Automatic Arc Welding InstallationsAWS/NEMA D16.2/D16.2M:2001